⎝⎛韦德足球⎞⎠

⎝⎛韦德足球⎞⎠

Position: home > News >

Introduce the spray process of spray dryer
Spray dryer is a kind of equipment with rapid development and wide application in the drying field. Suitable for the production of powdery, granular or massive solid products such as pumpable solutions, emulsions and suspensions. There are different drying characteristics such as heat sensitivity, viscosity and flow of dry materials ...
Cooperation unit: Shandong Bohui Group Co., Ltd.
Shandong Bohui Group Co., Ltd. was founded in 1976. It is a large-scale enterprise group that integrates papermaking, thermal power and chemical engineering, a national large-scale enterprise, a national high-tech enterprise, ten top export-oriented enterprise groups in Zibo City, and the provincial agricultural bank AAA. Credit enterprises, provincial ...
Difference between spray drying and belt drying, microwave drying
Spray drying is a systematic method for drying materials. After being atomized in the drying chamber, after contacting with hot air, the water evaporates quickly, that is, the product is dried. The method can directly dry the emulsion into powder or granular products, saving evaporation, ...
Learn about the application of experimental spray drying
A small experimental spray dryer pumps a liquid containing solids into a two-fluid nozzle through a peristaltic pump, and sprays the solution into the drying chamber through compressed air. The small water droplets in hot air have a large specific surface area. Heat exchange can make the surface water vapor ...
Advantages of bedroom drying equipment
The hot air supply device of the bedroom dryer is composed of an air filter, a blower, and a hot air stove connected in this order. The dust removal device is a pulse bag duster. The insulation material is rock wool. It has a simple structure and is easy to implement.
Use and operation of bedroom dryer
1) Turn on the main power supply 2) Adjust the position of the wind knife according to the thickness of the glass (four handles in the drying section) 3) Start the blower (console) 15 minutes before each shift production 4) Check whether the water tank is filled with water 5) Turn on the water pump (control Table) 6) Fill the sponge roller with water to make it swell, ...
七乐彩 韦德足球 欢乐拼三张 欢乐拼三张